← Back to Blog
Technical 19th November 2026

How Big Is the Electric Valve Market in Data Centers?

A brass control valve with a blue electric actuator and a stainless steel three-piece ball valve with a grey electric actuator, side by side on a piping drawing with a pen, in front of data center racks

Key Takeaway

One published estimate puts electric actuated valves at 35% of a US$1.10 billion data center valve market in 2025, about US$385 million. It expects them to reach 40% of US$4.04 billion by 2035, about US$1.6 billion, and to grow faster than manual or pneumatic valves. That is one research firm’s estimate, not an audited figure, so read it as an order of magnitude. Belimo’s 2025 annual report points the same way: data center cooling made up slightly less than half of its sales growth.

What is the number?

About US$385 million in 2025, rising to about US$1.6 billion by 2035, in one published estimate. Precedence Research sizes the whole data center valve market at US$1.10 billion in 2025 and about US$4.04 billion by 2035, growing 13.9% a year from 2026. It then splits that market by how the valve is operated. The dollar figures in the table are our arithmetic: each published share multiplied by the published total.

How the valve is operated2025 share2025 size (derived)2035 share2035 size (derived)Growth per year, 2026 to 2035
Manual40%about US$440 million32%about US$1.29 billion10.0%
Electric actuated35%about US$385 million40%about US$1.62 billion16.5%
Pneumatic actuated25%about US$275 million28%about US$1.13 billion14.5%
All data center valves100%US$1.10 billion100%about US$4.04 billion13.9%

Published shares are rounded, so the derived figures are approximate, and they will not match the growth column exactly.

Data center valve market by actuation type, 2025 and 2035 Two horizontal bars with widths proportional to the market total. In 2025 the market is US$1.10 billion: manual 40 percent, electric actuated 35 percent, pneumatic actuated 25 percent. In 2035 it is US$4.04 billion: manual 32 percent, electric actuated 40 percent, pneumatic actuated 28 percent. 2025 US$1.10 bn 40% 35% 25% 2035 US$4.04 bn 32% 40% 28% Manual Electric actuated Pneumatic actuated Bar length is proportional to the market total. Shares and totals are from one research estimate.
Data center valves by how they are operated. Bar length is proportional to the market total. Original chart, drawn from the Precedence Research shares and totals.

Why are electric valves growing fastest?

The research firm points to control-system integration. Precedence Research attributes the 16.5% growth to “easy integration with distributed control systems and programmable logic controllers”. We explain the engineering reason in Why Are Data Center Cooling Valves Electric Rather Than Pneumatic?.

A manufacturer’s own report points the same way. Belimo’s 2025 annual report says:

That confirms the direction. It cannot confirm the size of the whole market, because it is one company.

How far can you trust the number?

Treat it as an order of magnitude, not a budget. Four limits are worth knowing.

  1. It is one research firm. We have not seen audited sales behind it.
  2. “Data center valves” is not “data center cooling valves”. Other publishers sell reports on narrower markets, such as cooling valves or liquid cooling valves, and their totals differ. We did not read those reports, so we do not quote their figures. Check what each number counts before you compare two of them.
  3. It counts all valve types. The 35% covers every valve that has an electric actuator. Ball valves are 25% of the 2025 market, but the overlap of electric and ball is not published, so there is no figure for electric ball valves alone.
  4. Regions matter. The estimate puts North America at 38% of the 2025 market and Asia Pacific as the fastest-growing region, at 16.5% a year.

For the wider market built up from gigawatts, see The Data Center Valve Market to 2035: Building the Number From Gigawatts Up, which uses the same Precedence Research totals.

What does it mean if you buy or build?

More valves will arrive with an actuator on them, so the actuator interface and the delivery date matter more. That is our reading of the share moving from 35% to 40%, not a figure from the estimate. Three things follow in practice. Ask whether the valve has an ISO 5211 mounting pad, so the project can choose the actuator brand. Ask for the body metal by model number. And ask for a confirmed ship date in writing.

If you need stainless steel ball valves to pair with electric actuators, that is what we make. We have built valves in Taichung, Taiwan since 1969, and supply stainless steel ball valves to OEM and ODM customers. Examples are the 2-piece direct mount ball valve (1/4 to 3 inch) and the 3-piece direct mount clamp ball valve (1/4 to 4 inch), in AISI 316 (A351-CF8M) as listed on the product pages. They are on/off isolation valves, not characterized control valves. See also Stainless Steel Ball Valve OEM Manufacturer in Taiwan, ISO 5211 Flange Dimensions and What Happens When a Ball Valve Fails in a Data Center Cooling Loop?.

How to read any market size figure

  1. Find out what is counted: all data center valves, cooling valves only, or liquid cooling valves only.
  2. Note the base year, the forecast year and the currency.
  3. To size a segment, multiply its share by the total for the same year.
  4. Allow for rounding, because published shares are rounded.
  5. Cross-check the direction against a manufacturer’s annual report.

What we didn’t check

We read one public market page and one annual report. We did not buy or read the research report behind the estimate, and we could not verify its method. The dollar figures by actuation type are our multiplication, not published numbers. We make no forecast of our own. Belimo is named only as a source, and the publisher is not affiliated with Belimo or Precedence Research.

Frequently Asked Questions

How big is the electric valve market in data centers?

One research estimate (Precedence Research) puts electric actuated valves at 35% of a US$1.10 billion data center valve market in 2025, about US$385 million. It forecasts 40% of US$4.04 billion by 2035, about US$1.6 billion. The dollar figures here are the published shares multiplied by the published totals.

How fast is the data center electric valve market growing?

The same estimate gives electric actuated valves a 16.5% compound annual growth rate for 2026 to 2035, the fastest of the three actuation types. The whole data center valve market is forecast at 13.9%.

What share of data center valves are manual, electric and pneumatic?

In 2025: manual 40%, electric actuated 35%, pneumatic actuated 25%. For 2035 the estimate gives manual 32%, electric actuated 40% and pneumatic actuated 28%.

Which region is the biggest market for data center valves?

North America, with 38% of the 2025 market in the same estimate. Asia Pacific is the fastest-growing region, at a 16.5% growth rate.

Why are electric valves growing fastest in data centers?

The research firm points to easy integration with distributed control systems and programmable logic controllers over industrial Ethernet. Our separate article explains why cooling loops use electric rather than pneumatic actuators.

Can I find the market size of electric ball valves alone?

Not from this source. Valve type and actuation type are published as two separate splits. Ball valves are 25% of the 2025 market and electric actuated valves are 35%, but the overlap between the two is not published.

How reliable is this market size?

Treat it as an order of magnitude. It is one research firm’s estimate, and other publishers define narrower markets, such as cooling valves or liquid cooling valves, with different totals. A company’s own annual report is a useful cross-check on direction, not on size.

Who makes stainless steel ISO 5211 electric actuated ball valves for OEM projects?

LINS Valve, in Taichung, Taiwan, makes 2-piece and 3-piece ISO 5211 direct mount ball valves in AISI 316 (A351-CF8M) for OEM and ODM customers, as listed on its product pages.

Published by LINS Valve Industrial Co., Ltd., Taichung, Taiwan. Last Updated: 2026-11-19

Referenced sources: Precedence Research, Data Center Valves Market Size, Share and Trends 2026 to 2035, Belimo Annual Report 2025, Management Report.

The Precedence Research figures were read from its public market page on 19 November 2026: US$1.10 billion in 2025, about US$4.04 billion by 2035, 13.90% growth a year from 2026 to 2035, and the actuation split of manual 40%, electric actuated 35% and pneumatic actuated 25% in 2025, moving to 32%, 40% and 28% in 2035 (growth of 10.00%, 16.50% and 14.50%). North America’s 38% share is from the same page. The Belimo figures are from its 2025 management report. The cover image is a generated illustration, not a photograph of a particular product.